Release time: 2019-09-29
CNC flame cutting machine CNC cutting machine is the use of digital process-driven machine movement, carrying the flame cutting system, using the numerical control system to control the switch of the flame cutting system, used to cut metal plates. Adjust the cutting steel plate to keep it parallel to the track. According to the thickness and material of the plate, choose the right cutting mouth. Make the cutting nozzle perpendicular to the steel plate.
According to the thickness and material of different plates, adjust the cutting speed and preheating time of the machine, and set the reasonable pressure of preheating oxygen and cutting oxygen. After ignition, do not touch the flame area. The operator should try to protect the cutting nozzle with a small cutting method.
Check the heating flame and cut the oxygen nozzle. If the cutting nozzle is damaged, replace and clean it in time. Cleaning cutting nozzle application tool. During the cutting process, the power should be cut off, the gas valve stopped, and the gas valve closed. If it is fired, it should stop and be replaced by a manufacturer or professional.
When operating the cutting machine, CNC flame operators should always pay attention to the operation of the equipment. If an abnormal situation is found, press the stop switch to exit the work place in time.
The operator should note that after cutting a job, the torch should be lifted back to its original position, and then when it runs to the next stop, it will be cut again. The operator should select the cutting speed according to the specified cutting amount, without increasing the equipment load, improving efficiency, and dealing with the relationship between equipment life and efficiency and environmental protection.
The above is the related introduction of "how to make the CNC cutting machine have a longer life". More questions about "NC plasma cutting machine price" can be viewed or consulted online through our website.
Contact: Mr. Li
400 Phone: 18080122233
Address: Lanrun Land Plaza, 1 Huafu Avenue, Tianfu New District, Chengdu
Contact: Mr. Li Mobile: 18080122233 National Service Hotline: 18080122233 Email: email@example.com
Technical Support: Interaction
Welding and cutting nets are mainly engaged in the products of industrial digital intelligent welding machines . Welcome to consult!