Release time: 2018-06-06
Everyone knows that different CNC cutting machines have different cutting effects. So what influences cutting effects of cutting machines? The following CNC cutting machine manufacturers will introduce the impact of cutting oxygen on CNC cutting machines.
1.Cutting oxygen flow purity
The purity of cutting oxygen is an important factor affecting the cutting effect. If the purity of oxygen is too low, it will not only affect the cutting speed, but also make the cutting surface of the material being cut rough and the cuts slag, and the oxygen consumption will increase. Editor's Note: If the oxygen purity is less than 95%, the gas cutting effect is not good; if you want gas cutting, the oxygen purity must be above 99.6%.
2.Cutting oxygen pressure
If the pressure of the CNC cutting machine on the cutting oxygen increases, the oxygen consumption will also increase, but the thickness of the plate that can be cut also increases. But be aware that everything has a critical point, as is the cutting machine. If the pressure increases to a certain degree, the thickness that can be cut will decrease.
3.Cutting oxygen flow
When the cutting machine cuts the plate, as the cutting oxygen consumption increases, the cutting speed will be faster and the cutting quality will be improved. For different plates, there is an optimal oxygen consumption flow value. In this state, the cutting effect of the cutting machine can be maximized.
Contact: Mr. Li
400 Phone: 18080122233
Address: Lanrun Land Plaza, 1 Huafu Avenue, Tianfu New District, Chengdu
Contact: Mr. Li Mobile: 18080122233 National Service Hotline: 18080122233 Email: email@example.com
Technical Support: Interaction
Welding and cutting nets are mainly engaged in the products of industrial digital intelligent welding machines . Welcome to consult!