The CNC cutting machine should be regularly maintained and maintained. Long-term non-maintenance and maintenance will greatly shorten the service life of the CNC cutting machine, so that the accuracy and mechanical parts will go wrong. Clean the CNC cutting machine every day. Let's start finding solutions.
The CNC cutting machine has a lot of dust and oil stains. The horizontal axis of the dual-axis guide rail will definitely affect the cutting accuracy of the CNC cutting machine. If the motor in the horizontal direction of the machine is not moved and there is no gap, it means that there is not much relationship with the motor in the horizontal direction of the CNC cutting machine.
First determine whether the parameters on the CNC cutting machine have been moved. Then remove the motor in the horizontal direction of the CNC cutting machine and start to push the height adjuster to see if there is any slippage. Then check the bearings above, and the wear is not serious.
In fact, these are the problems caused by inadvertent maintenance. When you replace the new bearings, the CNC cutting machine resumes operation. The problem is solved. The emphasis is on the maintenance and maintenance of the CNC cutting machine. No matter how busy you are, you must clean up the dust And iron filings, in fact, the CNC cutting machine is usually a small problem, which not only saves the plate but also improves the efficiency.