Before using a welding machine for welding operations, we need to make preparations in advance. So what are the common preparations? Let's take a look with the Sichuan welding machine manufacturer Xiaobian:
1.The welding machine should be placed in a ventilated and dry place, and the welding machine should be placed flat, and the distance between the welding machine and the welding site should not be too far or too close;
2.The welding surface should pay attention to no light leakage and damage, and pay attention to the cleanliness of the welding surface without dirt;
3.Be sure to wear protective gear before welding to prevent damage to the body from welding light;
4.The contact between the welding machine, welding tongs, and power cords must be firm, and the insulation must be good, and there must be no heat in the wiring position.If the wiring is overheated, the welding machine should be stopped
5.If the welding machine wire is exposed, it should be wrapped with insulating tape.
6.The length of the wire between the welding machine and the welding clamp must not exceed 30 meters, in special cases it can be extended to 50 meters, not longer. If the wire is wet or broken, it should be replaced immediately;