CNC cutting machine is a more convenient and efficient cutting method. But many users still feel inefficient in production. So what are the main reasons for the inefficiency of CNC cutting production?
1.The CNC system is unstable
Due to the internal processor and hard disk of the CNC system heating, the system is unstable and cannot work at full time; fan wear, hard disk vibration or virus damage, resulting in production stagnation; In addition, the CNC cutting control software is defective, malfunctioning or cutting Errors, resulting in inefficient production.
2.No automatic cutting process and cutting parameter database
Therefore, cutting workers can only rely on experience and eye observation to manually operate the CNC cutting machine, unable to achieve automatic piercing and automatic cutting, which not only causes low production efficiency, but also seriously affects the cutting quality.
3.Not using nesting software
As a result, the entire board nesting and surplus nesting cannot be completed on the computer, but the part library or the read-in part is called for manual programming on the CNC system, so that the CNC cutting machine is in an idle state waiting for programming most of the time, which greatly reduces the CNC The production efficiency of the cutting machine, while the local cutting method will also cause a large amount of steel waste.
4. The cutting method is unreasonable
Using simple and common cutting methods, each part must be perforated and completely cut. It is better to use high-efficiency cutting methods such as common edge, borrow edge, bridging, etc. to obtain high cutting efficiency and cutting quality, and it is also easy to damage the cutting nozzle, especially Is the plasma cutting nozzle wasted.