For the selection and purchase of CNC cutting machine equipment, different people have different views. Some people think that it is very complicated and troublesome, while others think it is very simple and clear. The key to the selection of CNC cutting machine is not what you see, but what you need. What should you pay attention to when sharing the selection of CNC cutting machine manufacturers?
1. The factor to be determined is the thickness of the metal usually cut. If you usually cut thin metal, you should first consider a low current plasma cutting machine, and although small machines cut metal of a certain thickness, the quality of the cut may not be guaranteed. On the contrary, you may get almost no As a result, useless metal residues remain. Each machine will have a range of comparative cutting thickness settings. Make sure the settings are suitable for your requirements.
2. If you are cutting for a long time or automatically set the cutting, make sure to check the working load continuity of the machine. The load duration rate is simply the continuous working time before the equipment is overheated and needs to be cooled.
3. Most plasma cutting machines will have a guide arc, which uses high frequency to guide the current through the air. However, high frequencies can interfere with nearby electronic equipment, so a startup method that eliminates these potential high frequency problems can be quite advantageous.
4. There are various external parts on the plasma cutting torch that need to be replaced. The machine you need to find should use fewer consumables. Fewer supplies means cost savings.